Schaerer Ambiente 2, User Manual

Page: 47 / 130

User Instructions
‹ At the end of every menu:
Remove PROGRAM card Î coffee machine ready in normal operating mode.
Press [ ] or [ ] key to reach the next menu.
4.6.1.2. Programmable security level
If the service engineer has programmed security levels 1 or 3 for the PROGRAM
card, the PIN code must be entered each time the coffee machine is used.
1. Insert PROGRAM card into the card reader:
PIN-Code 0000
` +/- ` ` Decaf Æ `
2. Set the first digit of the PIN code using the [ ] and [ ] keys.
3. Confirm by pressing the [ ] key.
4. Repeat steps 4 and 5 for each successive digit until the full PIN code is entered.
5. Press
[ ] or [ ] key to reach next menu, remove PROGRAM card Î coffee ma-
chine ready in normal operating mode.
‹ Pressing the [ ] key accepts existing settings.
‹
The PIN code is only activated if so programmed.
‹ The current PIN code is not displayed.
4.6.1.3. Enable/disable payment mode
The licensed after sales service agent uses this function to enable or disable the pro-
grammed payment mode. It applies only to coffee machines connected to a payment
system.
1. Insert PROGRAM card into the card reader:
2.
Press [ ] or [ ] until the following menu is displayed:
accounting mode
........
3. Toggle enable and disable by pressing the [ ] key.
4.
Press the [ ] or [ ] key to reach next menu, remove PROGRAM card Î coffee
machine ready in normal operating mode.
4.6.1.4. Switch prices
‹ If all values are set to zero, the switch price function is automatically disabled and
price level 1 activated.
1. Insert PROGRAM card into the card reader.
2. Press
[ ] or [ ] until the following menu is displayed
change price level
execute ` Decaf `
3. Press [ ] key.
price – 1 00:00
4. Enter the number before the decimal point by pressing the [ ] and [ ] keys (price 1
0-99).
ª
BASO-2 - 02.04 - V08
Page 4-19