Schaerer Ambiente 2, User Manual

Page: 44 / 130

User Instructions
4.5.1.9. Change date
1. Insert CHEF card into the card reader.
2. Press
[ ] or [ ] key until the following menu is displayed:
change date
execute ` Decaf `
3. Press [ ] key.
change date
15.10.2001
4. Set the date using the [ ] or [ ] key.
5. Confirm by pressing the [ ] key.
6. Repeat steps 4 and 5 to set the month and the year.
7. Press
[ ] or [ ] key to reach next menu, remove CHEF card Î coffee machine
ready in normal operating mode.
4.5.1.10. Change PIN code
1. Insert CHEF card into the card reader.
2. Press
[ ] or [ ] key until the following menu is displayed:
change PIN-code
execute `Decaf `
3. Press key.
PIN-Code 0000
`+/- ` ` Decaf `
Æ
4. Set the first digit of the new PIN code using the [ ] and [ ] keys.
5. Confirm by pressing the [ ] key.
6. Repeat steps 4 and 5 for each successive digit until the full PIN code is entered.
7. Press
[ ] or [ ] key to reach next menu, remove CHEF card Î coffee machine
ready in normal operating mode.
‹ Pressing the [ ] key accepts existing settings.
‹ The PIN code is only activated if so programmed.
‹ The current PIN code is not displayed.
4.5.1.11. Service reminder
‹
The following optional message is only displayed if programmed:
select product
service wanted
‹ If this message was enabled by the installer for the CHEF card, it can be suppressed.
1. Insert CHEF card into the card reader.
2. Press
[ ] or [ ] key until the following selection is displayed:
(Number is only an example)
service wanted
service counter 45011
ª
Page 4-16
BASO-2 - 02.04 - V08