Schaerer Ambiente 2, User Manual

Page: 107 / 130

Payment Systems
8.4.1.2.6. Display waiter numbers
This function enables you to disable waiter sales. The logged-on WAITER cards are
not required in order to do so.
1. Insert MANAGER card into the card reader.
2. Press
[ ] or [ ] until the following menu is displayed:
3. Press [ ] key:
All of the waiter numbers in the waiter table are briefly dis-
played in order.
... and so on.
8.4.1.2.7. Data backup
If a WAITER card is lost or is defective, this function enables you to query the total
sales of the 32 most recently used WAITER cards.
1. Insert MANAGER card into the card reader.
2. Press
[ ] or [ ] until the following menu is displayed:
3. Press [ ] key:
4. Pressing the [ ] key enables you to query the total sales in order starting with the
highest waiter number
8.4.1.2.8. Change PIN code
1. Insert MANAGER card into the card reader.
2. Press
[ ] or [ ] until the following menu is displayed:
3. Press [ ] key:
4. Set the first digit using the [ ] and [ ] keys.
5. Confirm with the [ ] key.
6. Repeat steps 4 and 5 until the complete PIN code has been entered.
‹ When the final digit is confirmed, the new PIN code is briefly confirmed.
change PIN-code
execute ‘ Decaf ’
PIN-Code 0000
‘ -/+ ‘ ‘ Decaf ‘ -->
save data
display ‘ Decaf ’
waiter 3
sales 22.222
save data
sales 0.000
waiter 1
waiter 2
waiter 3
PIN-Code 0000
... Down ...
CHEF
‹ Pressing the [ ] key accepts existing values.
‹ The PIN code is only activated if so programmed.
‹ The current PIN code is not displayed.
BASO-2 - 02.08 - V08
Page 8-19