(DVD) FMQR Series P1
E405 Series User Guide
PACKAGE CONTENTS
SCEPTRE Display x 1
Display Base x 1
Display Neck
Thick Threaded Screws (ST4x14mm) x 4
Plastic Ring x 1
Metal Plate x 1
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1
User Guide x 1 (
Complete manual available online at sceptre.com)
ATTACHING & REMOVING THE BASE
1.
To install or remove the neck, screw in or remove the 5
fine threaded
screws
indicated in the picture.
2.
Place the display unit flat on a table. Afterwards attach the plastic base onto the neck by form fitting the circular
hole. Remember the plastic base should have more area facing the front of the neck. Fit the plastic ring first to the
bottom of the base, then the metal plate onto the bottom of the base by matching the 3 holes. Screw in the
4 thick
threaded screws
to secure the metal plate to the plastic base. The stand installation is now complete.
3.
To finalize your installation of the Display, please read the following:
a.
If you are placing the Display on a stand, we would recommend you to use a Display safety strap (not
included) in order to minimize the possibility of the Display toppling over.
b.
If you are mounting the Display on the wall
c.
Make sure the wall is structurally safe for the weight of the Display
d.
Make sure the wall mount kit is compatible with the Display
e.
Read and follow all instructions provided by the wall mounting kit.
f.
Securely install all screws and connections.
