Part No. SCAZ037886 8.6.00
24
E&OE
Merlin and Magnum Hydrostatic
Operating Instructions
Rear mounted/Overhead wander booms
Using the rear mounted wander hose
Vehicle in hydrostatic drive. Drive control lever in neutral. Handbrake On. Multi-function
lever ON.
1. Suction Fan ON.
2. Unhook the wander hose boom
q
from its stowed position
w
.
3. Demount the hose assembly
e
from its stowage and swing-out the entire assembly to
the required position.
4. Turn the wander hose control
r
ON (always mounted on the drive side).
If water suppression is required place the multi function lever in the ON position.
On vehicles equipped with pneumatic assist, use the UP/Down controller
t
(always
mounted on the drive side) to unhook the wander hose.
For maximum suction power, select fan ‘boost’.
5
4
3
2
1
O = OFF
I = ON
OFF
ON
