Scantronic iNSIGHT 20 Plus Operator'S Manual Download Page 91

Page: 91 / 187

Chapter 4: Document Imaging Basics

Scantron

NSIGHT 20 Plus Scanner

Click&Scan Software

Click&Scan is a more powerful program intended to fulfill

your daily ad hoc scanning needs. Through the

Click&Scan interface, you can choose from nine different

scanning options that you can configure based on your

needs.

Main Scanner Window (TWAIN Driver Interface)

The Main Scanner window gives you access to all settings

that precisely define how you want to scan your images.

You can save and name up to 60 setting shortcuts, each

having unique control settings over how the images are

scanned.

This window gives you access to the Image, Advanced,

and Device settings that are saved with the setting

shortcut. Those settings are actually the TWAIN driver

(scanner controller) interface. Click&Scan software

provides access to these settings. If you use other TWAIN

Summary of Contents for iNSIGHT 20 Plus




























































































































































































Search results

Summary of Contents for iNSIGHT 20 Plus

Reviews:

Brands by name

Popular brands

Scantronic iNSIGHT 20 Plus, Operator'S Manual

Search results

Summary of Contents for iNSIGHT 20 Plus

Reviews:

Brands by name

Popular brands