Scantronic iNSIGHT 20 Plus, Operator'S Manual

Page: 48 / 187

Chapter 2: Scanner Basics
Document Preparation
Operator’s Guide 35
• Paper Types: Precision forms printed by Scantron
are recommended for best results. Self printed forms
using Scantron DesignExpert TM with the PrintFlex TM
option are also acceptable.
• Paper Weights: 60 - 90 lb., (24 - 35 lb. bond),
(89 - 133 g/m
2
)
• Minimum Document Size: 2.5" x 5.5" (6.4 x 14 cm)
• Maximum Document Size: 8.5" x 14" (21.6 x 35.6 cm)
Damaged Documents
Sheet repair is possible in many cases. A list of possible
repairs follows:
•
If a sheet is folded or crumpled, it can be flattened by
placing a flat weight on it overnight.
• If a sheet has dark marks on it, you can erase them or
use correction tape to cover them up. If using liquid
correction fluid, be sure to allow it to dry thoroughly
before scanning as otherwise it can get on the imaging
guide and cause errors.
• If a sheet is torn you can use tape to repair it. Be sure
to verify that the form is read correctly if taping over
marks or the timing track.
NOTE:
Tape on a sheet may generate a multiple sheet
error that will be displayed in the software.
If you are unable to repair the damaged sheet, copy the
marks from the damaged sheet onto a new one.
NOTE:
Protective sleeves cannot be scanned for data collec-
tion because of the effect the sleeve has on calibration.
Document Imaging
General Guidelines
• Remove all staples and paper clips before scanning.
Staples and paper clips on documents may damage the
scanner and documents.
• Documents should be in good condition.