manualshive.com logo in svg

Scantronic iNSIGHT 20 Plus, Operator'S Manual

Share
Download
Scantronic iNSIGHT 20 Plus Operator'S Manual Download Page 25

Chapter 1: iNSIGHT 20 Plus Dual Purpose Scanner

EMC Statements

12

Scantron 

i 

NSIGHT 20 Plus Scanner

EMC Statements

United States

This equipment has been tested and found to comply with 

the limits for a Class B digital device pursuant to Part 15 

of the FCC rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses, 

and can radiate radio frequency energy and, if not installed 

and used in accordance with the instruction manual, may 

cause harmful interference to radio communications. 

However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does 

cause harmful interference to radio or television 

reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following 

measures:
•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and 

receiver.

•

Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV 

technician for additional suggestions.

Any changes or modifications not expressly approved by 

the party responsible for compliance could void the user’s 

authority to operate the equipment. Where shielded 

interface cables have been provided with the product or 

specified additional components or accessories elsewhere 

defined to be used with the installation of the product, 

they must be used in order to ensure compliance with 

FCC regulation.

Korea

As this equipment has obtained EMC registration for 

household use, it can be used in any area including 

residential areas.

Summary of Contents for iNSIGHT 20 Plus




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands