manualshive.com logo in svg

Scantronic iNSIGHT 20 Plus, Operator'S Manual

Share
Download
Scantronic iNSIGHT 20 Plus Operator'S Manual Download Page 160

Chapter 7: Product Support and Services

Printed Documentation

Operator’s Guide

147

Printed Documentation

Your 

i

NSIGHT 20 Plus scanner comes with printed 

documentation for the scanner and the included software. 

The documentation set provides information on 

packaging, installation, setup, operation, and configuration 

for users and system administrators.

The printed documentation set for the 

i

NSIGHT 20 Plus 

consists of the following:

•

What’s in This Box for the iNSIGHT 20 Plus Scanner

 

(Publication Number 277 160 xxx*)

•

Quick Start for the iNSIGHT 20 Plus Scanner

 

(Publication Number 277 524 xxx*)

•

Quick Tips for the iNSIGHT 20 Plus Scanner 

(Publication 

Number 277 525 xxx*)

•

ScanTools Plus Installation Guide**

 (Publication Number 

203 583 xxx*)

* Where xxx indicates the current revision number.
** This documentation is included only if your scanner 

came bundled with ScanTools Plus data collection 

software.

In addition, copies of most printed documentation, in 

PDF files, are also available on the 

i

NSIGHT Scanner 

Utilities and ScanTools Plus CDs.

Summary of Contents for iNSIGHT 20 Plus




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands