manualshive.com logo in svg

Scantronic iNSIGHT 20 Plus, Operator'S Manual

Share
Download
Scantronic iNSIGHT 20 Plus Operator'S Manual Download Page 122

Chapter 5: Maintenance

Running a Transport Cleaning Sheet

Operator’s Guide

109

Running a Transport Cleaning Sheet

NOTE: 

The scanner cover must be closed and powered on 

to run a transport cleaning sheet.

1.

Remove the wrapping from the Transport Cleaning 

Sheet.

2.

Adjust the side guides to fit the cleaning sheet.

3.

Place a transport cleaning sheet in the input tray 

(adhesive side up) in portrait orientation.

4.

Using your scanning application, scan the transport 

cleaning sheet.

5.

After the transport cleaning sheet is scanned, turn it 

over (adhesive side facing the input tray) and scan it 

again.

6.

Open the scanner cover and wipe the imaging area 

with a lint-free cloth.

7.

Close the scanner with both hands, and check the 

image quality.

8.

Repeat this procedure, if necessary until all residue is 

removed from the drive rollers. If you are unable to 

remove all residue from the drive rollers using the 

transport cleaning sheet, perform the procedure 

described in “Cleaning the Rollers and Transport” on 

page 110.

9.

When a transport cleaning sheet gets very dirty, 

discard it and use a new one.

10.

When you are done running transport cleaning sheets, 

open the scanner and check that the imaging guides 

are clean. If necessary, clean the imaging guides as 

described in “Cleaning the Imaging Guides” on 

page 116.

Summary of Contents for iNSIGHT 20 Plus




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands