Scantronic iNSIGHT 20 Plus, Operator'S Manual

Page: 118 / 187

Chapter 5: Maintenance
Supplies and Consumables
Operator’s Guide 105
Supplies and Consumables
See “Ordering Supplies” on page 151 for information on
how to order supplies.
IMPORTANT:
Staticide wipes contain isopropanol which can cause eye
irritation and dry skin. Wash your hands with soap and
water after performing maintenance procedures. Refer to
the Material Data Safety Sheet (MSDS) section below for
more information.
Supplies/Consumables Purpose Item Number
Feed Roller Kit Replaces feeder consumable
components.
ACL200
Separation Module (with tires) Replaces separation module. ACL2021
Feed Module (with tires) Replaces feed module. ACL2020
Transport Cleaning Sheets
(50)
Use for cleaning the upper and
lower transport areas. Do
not use on the gray foam tires or
imaging guides.
ACL303
Staticide Wipes (24) Use for cleaning the upper and
lower imaging area.
ACL305
Emulsiclean Detailer Wipes
(24)
Use for cleaning the upper
and lower transport areas and
drive rollers. Do not use on the
gray foam tires or imaging
guides.
ACL304
Calibration Sheets Use to recalibrate the scanner
for data collection after
replacing imaging guides or
moving to a different computer.
FRM60
Relocation Kit CNT48