Scanivalve MPS4264, Hardware And Software Manual

Page: 62 / 99

56
MPS4264
Section 5: Software
Set Options (OPTIONS)
DESCRIPTION Set the subset size of the real time data analysis sample
SYNTAX SET OPTIONS <fast scan> <read mode> <statistical scan subset size>
Where <fast scan>:
0 – Normal scan
1 through 4 – Fast scan starting channel (see section on “Fast Scan Option (850Hz - 2500Hz)”
on page 24)
<read mode>:
0 – Normal statistical scan (see section on “Statistical Scan Option” on page 24)
1 – Read mode in statistical scan
<statistical scan subset size>:
Size is set to any value between 2 and 256. This value is the number of samples the statistical
engine uses to calculate the statistical parameters.
RETURNS Prompt when ready to accept a new command
EXAMPLE
SET OPTIONS 0 0 16
>
DEFAULT 0 0 16
RANGE 0 through 4, 0 or 1, 2 to 256