Scanivalve MPS4264, Hardware And Software Manual

Page: 48 / 99

42
MPS4264
Section 5: Software
Format Flash Disk
DESCRIPTION Formats the flash memory of the MPS. WARNING: Formatting the flash memory is considered to
an advanced operation. Use caution before proceeding.
SYNTAX FDISK
RETURNS > fdisk
Type FDISKCONFIRM to confirm FDISK or STOP to escape
> fdiskconfirm
Start format
Erasing device 100
Done device 100
EXAMPLE >
fdisk
Type FDISKCONFIRM to confirm FDISK or STOP to escape
>
fdiskconfirm
Start format
Erasing device 100
Done device 100
Multiple Unit Find
DESCRIPTION Lists all of the MPS4264 devices in the multicast cluster of the master.
SYNTAX MFIND
RETURNS A list of MPS modules found in the multicast “cluster” followed by a prompt ready for the next
command.
EXAMPLE MFIND
Found device 0 IP Address 191.30.90.9
Multiple Unit Stop
DESCRIPTION Sent to stop multiple units when working with multiple devices. When the master receives the
MSTOP command it issues a STOP command to the multicast address set in the MCAST variable.
Each MPS member of this multicast cluster will stop scanning.
SYNTAX MSTOP or <ESC>
RETURNS Prompt ready for the next command.
EXAMPLE
MSTOP
>
Reboot
DESCRIPTION Restarts the MPS4000.
SYNTAX REBOOT or RESTART
RETURNS Nothing
EXAMPLE REBOOT