20
Manual tuning
Using the right rotary encoder/push button
:
•
Rotate the turn/push button in the RADIO menu; clockwise or counter-clockwise
to change the receiving frequency.
Using the frequency display:
•
Tap on the icon
.
>
A frequency scale is displayed.
Perform one of the following to set the desired station manually.
•
Tap the frequency scale.
•
Press on the
or
button
or on the button
or
on the touch screen.
•
Rotate the right rotary encoder/push button
clockwise or counter-clockwise.
STORE RADIO STATIONS
Radio stations can be stored on each waveband (AM and FM) using the station
buttons.
•
Select the desired waveband.
•
Set the desired station.
•
Press and hold one of the station buttons until you hear a beep.
>
Pressing the corresponding station button retrieves the station from the station
memory.
Note
If you do not hear a beep when saving the radio station, it may be that the
system sounds are deactivated. To activate the system sounds, see the
chapter "Introduction", sub-chapter "Customise settings".
RETRIEVING RADIO STATIONS
•
Select the desired waveband.
•
Press a station button.
>
The corresponding radio station is played.
