SCANGRIP CANVIK TITAN, Operating Instructions Manual

Page: 9 / 88

9
GB
CONICAL SPRINGS:
Use the raised jaw 90.0060 to ensure that the centre line of the spring is parallel to the compressing
device. Do not use the coil spring compressor for conical springs if this is not the case. Fit the
raised jaw 90.0060 at the spring end with the smallest diameter.
It is very important for your safety that the jaws are fitted correctly and that the
bolts are firmly tightened before use.
BALL SPRINGS:
Use the raised jaw 90.0060 to ensure that the centre line of the spring is parallel to the compressing
device. Do not use the coil spring compressor for ball springs if this is not the case. Fit raised jaws
90.0060 at both spring ends.
It is very important for your safety that the jaws are fitted correctly and that the bolts are firmly
tightened before use.
ACCESSORIES
Special purpose jaws for all kinds of springs:
Jaw “counterclock” for springs ø145-195mm 90.0025
Jaw fitting spring diameters of Ø140-175 mm 90.0030
Jaw fitting spring diameters of Ø180-230 mm 90.0040
Jaw fitting spring diameters of Ø80-120 mm 90.0050
Jaw, Ø80-145 mm for conical and ball springs 90.0060
Jaw for BMW E39, E46, Renault Megane II and Toyota Avensis 90.0070
Jaw for Mercedes C-class 90.0080
Jaw for Mercedes E-class and Renault Megane II 90.0090
Jaws (pair) for Peugeot Break, Citroën C15 90.0100
Jaw for Chrysler Grand Voyager, “counter clock” spring 90.0120
SPARE PARTS
Standard jaw for ø80-200mm incl polyurethane insert 10.0010
Foot pedal 10.0055.01
Trolley wheel 10.0055.02