SCANGRIP CANVIK TITAN, Operating Instructions Manual

Page: 8 / 88

8
GB
INSERTING THE SPRING
When inserting the spring the first step is to move the spring holders apart until there are room for the
spring. Insert the spring. Use the right foot pedal to press the spring until it automatically stops. The
spring is now fastened and the safety cage can be closed before compressing the spring.
Deactivate the safety mechanism by closing the safety cage to compress the spring
REMOVING SPRING
To remove the spring the spring holders are moved apart until they almost loose grip of the spring,
then the safety cage is opened and the spring holders are moved apart until the spring can beremoved.
RETURNING TO OPERATION AFTER FAILURE OR EMERGENCY
The emergency stop is switched off and the greent button is activated.
BUILT-IN SAFETY PRECAUSIONS
Moving parts are shielded so that there are no risks related to the use of the machine.
The spring cannot be compressed unless the safety cage is closed.
It is not allowed to use the spring compressor without the safety cage.
Before use make sure that the safety cage is securely closed after mounting the spring.
There is an emergency switch on the left side of the spring compressor.
EMERGENCY STOP