Product Manual and User Guide – ThurayaIP Active Antenna
Version A
30. august 2010
Page 12 of 18
SCAN Antenna A/S –
www.scan-antenna.com
6.4 SAT connector
This is a snap-on connector of type “QMA”. It is the main interface between the ThurayaIP
terminal and the antenna. This connector must always be connected, or no satellite connection
will be possible.
This connector connects to the “Passive antenna” port of the ThurayaIP, even though it is an
active antenna. Do not connect this port to the “Active antenna” port.
The passive antenna port has an SMB connector on the ThurayaIP, so the coaxial cable
connection, including any jumpers, must have a male QMA connector on one end, and a
female SMB connector on the other end.
