Scan-Electronics RadiaCode-101, User Manual, Page: 26 / 36

24
© 2021 Scan Electronics Ltd.
Standalone usage
·
To return to the higher level with or without
changes select
[Enter] or [Esc] item
respectively;
·
confirm your choice by long pressing the round
button.
To return to the Settings or quit the menu set
focus on the [<Back] or [<< Menu quit] item
respectively and confirm your choice by short
pressing the round button.
3.8.5 Screen
You can customize the screen parameters to suit your needs.
Use [Screen] item of Settings to customize the display parameters:
·
while in the Settings , set focus on the [Screen] item by short pressing
the " up " and " down " swing buttons;
·
enter the submenu by short pressing the round button.
If you need to change the backlight parameters of display, take the following steps (while in the
[Screen] ):
·
set focus on the [Backlight] item by short pressing the " up " and " down "
swing buttons;
·
enter the submenu by short pressing the round button.
§
To change the backlight turning-on mode (while in the [Backlight] ):
·
set focus on the [Turning on] item by short
pressing the swing buttons;
·
select the backlight turning-on mode by short
pressing the round button, there are 3 variants:
[Auto] (default) , [Never], [By button] .
§
To change the backlight duration (while in the [Backlight] ):