- 1 -
VT-200RGB Operation manual
This apparatus is an industrial use
This equipment complies with FCC’s RF radiation exposure limits set forth for
an uncontrolled environment. The antenna(s) used for this transmitter must
be installed and operated to provide a separation distance of at least 20 cm
from all persons and must not be collocated or operating in conjunction with
any other antenna or transmitter. Installers must ensure that 20cm separation
distance will be maintained between the device (excluding its handset) and
users.
Components and their name
1.LAN Connecter(RJ-45) It is for maintenance by manufacture only.
2.RGB Connecter
Picture input
3.Battery LED
When the battery voltage decreases,
It turn on
4.Busy LED
Lighting during the initial setting
5.Power Switch
Power ON/ OFF
6.DC IN(Micro USB)
Connect to the external power
Preparations for application program [ScalarMovie]
Install the application into iPhone or iPad
Please download and install the free application
From AppStore onto your iPhone /iPad /iPod touch.
Connection of the wireless LAN
1. On the home screen of iPhone or iPad,
Press the Setting icon and select Wi-Fi
2. If Wi-Fi is off , make it on.
3. Select
“Wireless Camera” in the wireless network selection
4. Enter your password.
The fact
ory default of the password is “12345678”
5. Press the home button on the iPhone or iPad to return to the
home screen. ..
Setting VT-200RGB
1. Put Alkaline battery (four) in the main body battery case.
Be careful about polarity on this occasion.
2. Connect RGB connector of the front part of main body to RGB
output terminal of the video equipment with a cable.
In addition, the sound is non-compliant.
3. Turn on power switch of the main body front. Green
The LED of the power switch turns on.
4. It starts in approximately 50 seconds, and Busy LED (Red) flashes
on and off, and Busy LED (Red) disappears if connection with the
video equipment is established and starts movement.
Start and termination of the image application
.
1. Touch
“Scalar Movie” and an image appears.
Press the home button to terminate.
If an image does not appear, please terminate the
application completely and start it from the beginning again.
Setting of Scalar Movie
1. Press the Setting icon of Scalar Movie. Setup screen is
displayed
Setable function
1. Image quality
-Low quality -Middle quality
-High quality
2. Setting
-SSID
-Wireless channel
-Security
-Password
3. PAUSE
4. Record still image
5. Record movie
DC IN
背面
1
2
3
4
5
1
2 3 4 5
6
6