5
R
Section 2
2.4 OPERATION CONSIDERATIONS
This truck loader is designed for use at highway speeds in
normal conditions.
CAUTION
Tow at speeds appropriate for conditions. Reduce
speeds for:
• Rough Roads
• Winding Roads
• Cornering
• Adverse weather including rain, snow, ice and
high winds
1. Know the function of all controls and how to stop
quickly in case of an emergency.
2. Do not carry passengers. Keep bystanders, children
and pets away from the machine.
3. Make sure the hose and boom are secured before
transporting your Truck Loader.
4. Do not operate without the discharge connected to a
debris receiver box.
5. Do not overload the machine by attempting to chip
or shred any material beyond the manufacturer's
recommendation.
6. Do not operate on slopes if you are uneasy or
uncertain. Ultimate responsibility for safe operation
on slopes rests with the operator.
7. Exercise extreme caution when making turns or
changing direction on slopes. Keep all movements
slow and gradual.
8. Slow down and use caution when making turns and
crossing roads and side walks.
9. Be sure of your footing. Poor footing could cause a
slip and fall accident.
10. When using this machine, never direct the material
being collected toward bystanders or allow anyone
near the machine while in operation.
11. Do not operate around cars, windows, or other items
which could be damaged by blown debris.
12. Before attempting to start the engine, inspect the
machine, inlet hose, discharge, debris receiver box,
shields and safety devices for any damage. Correct
any problems before operating.
13. Stop on level ground and shut off the engine before
leaving the operator's position for any reason
including emptying the debris box or clearing an
obstruction in the intake or discharge.
14. If the truck loader ever plugs, shut off the engine,
and wait for all movement to stop before removing
the obstruction.
WARNING
DO NOT use your hand to dislodge the clogged
material. Use a stick or other device to remove
clogged material after the engine has stopped
running and the blower fan has stopped
turning.
15. If the machine begins to vibrate abnormally, shut the
machine off immediately. Inspect the machine and
have repairs made before restarting.
16. Be alert for holes, rocks, roots and other hidden
hazards in the terrain. Cautiously enter a new area.
Be alert for hidden hazards.
17. Do not operate near drop-offs, ditches or
embankments. You could lose your footing, balance
or drive the machine off the edge.
18. Use only in daylight or good artificial light.
19. Do not leave the machine unattended.
20. The machine and attachments should be stopped
and inspected for damage after striking a foreign
object, and damage should be repaired before
restarting and operating the machine.
21. Keep hands and feet away from blower intake and
discharge. Contact can injure.
CAUTION
Do not touch the engine or the muffler while the
engine is running or immediately after stopping.
These areas may be hot enough to cause a
burn.
