26
R
Section 7
7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS
HOURS
PROCEDURE
COMMENTS
BREAK-IN
(FIRST 10)
8
20
40
100 200 500
X
Check all hardware for tightness
X
C h e ck a l l b e l t s fo r p r o p e r
alignment
See paragraph 7.6
X
Check all hydraulic fittings and
hoses for leaks
See paragraph 2.5
X
Check engine oil level
See paragraph 7.3
X
*Clean mower
X
Check tire pressure
See paragraph 7.8
X
*Clean air filter element
See paragraph 7.5
X
Check condition of blades
See paragraph 7.7
X
Sharpen cutter blades
See paragraph 7.7
X
Check tire pressure
See paragraph 7.10
X
Check belt tension
See paragraph 6.3
X
Check the operator interlock
system
See paragraph 2.4 / 4.3
X
Change engine oil and filter
See paragraph 7.3
X
Grease spindle bearings
X
Check belts for proper alignment
See paragraph 7.6
X
Check condition of fuel lines
X
C h e ck a l l b e l t s fo r p r o p e r
alignment
X
*Replace engine air filter
S e e e n g i n e o p e ra t o r ' s
manual
X
Grease caster wheel bearings
See paragraph 7.2
X
Check hydraulic system oil level
See paragraph 7.3
X
Check all hardware for tightness
X
Change engine oil
See paragraph 7.4
X
Grease brake lever and brake
actuator levers
See paragraph 7.2
X
*Clean air cleaner element
See paragraph 7.5
MAINTENANCE