UK
USER MANUAL
1.
Wipe the screen with the “wet/
umido” then dry the screen with
“dry/asciutto” cloth and use
the “dust absorber’ sticker to
completely remove any dust from
the phone screen. Be careful not to
leave fingerprints on the part to be
protected.
2.
Insert the lower plastic applicator
into the charging port of the phone
after selecting the right connector
to use, according to the model of
your phone. Then insert the upper
plastic applicator.
3.
Remove the black plate under the
screen protector then place the
film between two applicators (be
careful not to touch the adhesive
part of the screen protector). Fix
the lower applicator by hooking
the closing applicator over it.
4.
Using the spatula to press on the
film to apply it, moving it from the
external part of the screen protector.
Remove off the entire transparent
film by pulling from the upper
applicator.
5.
Remove the lower plastic
applicator and use again the
spatula if any air bubble remains.