SBS SBS-3510 Instruction Manual And Safety Information Download Page 61

Page: 61 / 68

SBS-3510 User’s Manual

A.2:

Instrument Data and Operating Conditions

Dimensions (L x W x H)

9.6 in x 4.1 in x 5 in (245 mm x 103 mm x 126 mm)

Weight

23.3 oz. (660 g)

Power supply

Battery type

3x Alkaline battery 1.5 V AA (LR6)

Battery life

> 100 hours

Ambient temperature

• Standard type SBS-3510:

–10°C to +50°C (+14°F to +122°F)

Storage temperature

• max. 55°C (131°F) with batteries

• max. 70°C (158°F) without batteries

Air humidity

5–90 % relative humidity, non-condensing

Protection class

IP54

Interface Data

Bluetooth

, RFID

Memory

1024 measured data sets

250 sample IDs / 30 measuring methods

a The sample must not freeze in the measuring cell.

A.3:

Wetted Parts

The following materials are in contact with the samples and cleaning agents:

Material

Part

Borosilicate glass

measuring cell, filling pump

Kalrez

flat seal between connection block and measuring cell

Polypropylene

housing SBS-3510

PTFE

filling tube

PVDF

connection block, screw plug, adapter Luer, pump lever

Viton Extreme

sealing of the filling pump

Summary of Contents for SBS-3510





































































Search results

Summary of Contents for SBS-3510

Reviews:

Brands by name

Popular brands

SBS SBS-3510, Instruction Manual And Safety Information

Search results

Summary of Contents for SBS-3510

Reviews:

Brands by name

Popular brands