background image

Storage Battery Systems, Inc.                                                         MANUAL PSC

 

28

 

 

 

Warranty 

 

 

 

 

 

 

SBS/Primax warrants to the original user that its rectifying equipment, load banks, DC-DC converters, 

batteries, chargers and UPS systems are free from defects in factory workmanship and materials, such 

warranty being conditional upon the product having been installed, commissioned, operated and 

maintained by qualified personnel and according to manufacturer instructions. 

SBS's liability is limited to repairing or replacing without charge at its factory any product or component 

which at user's expense has been returned to SBS or authorized service center within 1 year from date 

of commissioning whichever occurs first.  SBS's repair or replacement of any defective product shall 

constitute fulfillment of his obligations. 

This warranty applies to manufacturer products which are shown by the purchaser to have been 

originally defective and shall not apply to products which must be repaired or replaced due to normal 

wear, misuse, negligence, wreckage, accident, any act of god or to products which have been repaired 

or altered outside of seller's factory or one of its authorized service centers unless authorized solely by 

SBS. 

SBS shall not be liable for loss, damage, or expense, consequential or otherwise from the use of its 

products or from any other cause. 

This warranty supersedes and is given in place of all other warranties expressed or implied or 

conditions whether statutory or otherwise as to quality and fitness for any purpose for which the 

products are supplied.  No person, agent or dealer is authorized to give any warranty on behalf of 

manufacturer or to assume for seller any other liability in connection with any of its products unless 

made in writing and signed by an officer of SBS. 

 

Storage Battery Systems, Inc. 

N56 W16665 Ridgewood Dr. 

Menomonee Falls, WI 53051 

Tel: (262) 703-5800 

Fax: (262) 703-3073 

E-mail: [email protected] 

Web site : 

www.sbsbattery.com

 

 

 

Electrical / Electronic Products Warranty

 

Summary of Contents for PSC-SERIES






























Reviews: