Document
9911004rev27
Title
Date
2017-02-16
Page
75(81)
SBS MicroSMART Battery Charger Technical Handbook
6.
Charging parameters changed
7.
VCC status
8.
Voltage calibration
9.
Current calibration
10.
Start of radio network
11.
Join of radio network
12.
Charger start up
13.
Settings changed in charger
Information
Information about and data connected to the
event.
11.3.
Instant log
Charger ID
Charger identifier. Configurable via the charger
menu system or Advanced, Configure charger in
Service tool.
Log time
Time stamp of the instant log.
Charger local time.
DC Voltage (V)
Actual battery charging voltage. If a Cable Ri is
defined this voltage will be (measured charging
voltage – Cable Ri*measured battery charging
current).
DC Current (A)
Actual battery charging current. If a Base load is
configured this charging current will be measured
charging current – Base load.
Board temperature
Charger control board internal temperature.
Heat sink temperature
Charger heat sink temperature.
Alarms
Blank if no alarms present during charge cycle.
Text according to alarm description in charger.
Log index
Total instant log count since startup.
This number can be used as a unique identifier of
the instant log cycle in case a Clear statistics is
made in the charger.
11.4.
Status log
All information in the status log is measured momentarily at read out time.
Charger model
The power unit description.
Time
Charger local time.
