Document
9911004rev27
Title
Date
2017-02-16
Page
63(81)
SBS MicroSMART Battery Charger Technical Handbook
9.15.
Activate Remote in Start/Stop
With I/O control means that the charger can be set either to be controlled by external
functions (Remote input) or to control external functions (Remote out). See
5.5.7 I/O control
for more information. The remote input is activated when connected to the battery minus i.e.
when the charger is connected with the connector to the battery. See the pictures below for
a better understanding. The remote input connection is placed on Pin 4 on the I/O board in
the bottom left corner and can via the red and black connections on the glove be connected
to battery minus. This cabling can be installed during the manufacturing process if requested
upon order.
