Document
9911004rev27
Title
Date
2017-02-16
Page
51(81)
SBS MicroSMART Battery Charger Technical Handbook
9.
The following menu is shown when a network has been found.
Note that it is always preferable to connect to the device that originally started the
network to prevent the network from running out of addresses. See Address pool
under
5.5.12.2 Network info
for more information.
10.
When connected to a network press ESC until the main screen is shown.
9.6.
Activate a BBC system
1.
Before start setting up your BBC system it is always important to think through how
you should administrate the battery park, which type of chargers should be
included in which group and what numbers the different groups should be
assigned. In order for the BBC system to work satisfactory all chargers of a certain
type, for example chargers which are designed to charge 48 V batteries should all
have the same
Group ID
. See
5.5.6. BBC
for more information.
2.
Go to the service menu according to the tutorial Enter the service menu. Put the
marker on the field
BBC
and press
OK
. Note that the function
BBC
only is visible in
the service menu if the charger is connected to a radio network.
3.
When no BBC function is activated the following menu is shown.
4.
Set the field
Function
to
Enabled
by putting the marker on the field
Function
and
press
OK
. The following menu is shown. Press
OK
to log in.
