SBS Technologies Telum GE-QT, User Manual

Page: 17 / 50

Hardware Overview 7
Chapter 2: Hardware Description
The Telum GE-QT is a highly integrated AMC I/O telecommunication module that supports
high-performance carrier-grade network services to provide a wide range of high throughput
Ethernet applications.
Hardware Overview
The Telum GE-QT is accessed by the host through an AMC interconnect running a x4 PCI Express
(PCIe) that complies with AMC.1 specification. The PCIe Switch connects to two Intel® 82571EB
Dual Gigabit Ethernet Controllers. Each Ethernet Controller appears to the host as an independent
PCIe device. Each Controller is a multifunctional device with two Ethernet ports that appear to the
host as two separate functions. Each function has a complete register set and implements 64-bit
address mode.
The Telum GE-QT contains the following components as shown in Figure 2:
•
Dual Gigabit Ethernet Controller
•
PCI Express Switch
•
IPMI Controller with module management
•
Four RJ-45 Connectors
•
AMC Connector
•
Front panel hot-swap and status LEDs
Figure 2. Telum GE-QT Block Diagram
PCI-Express
Switch
x4 PCI Express
Magnetics
(Dual)
Magnetics
(Dual)
Quad RJ-45
Connector
Ports 1-2
Ports 3-4
3.3V
12V
Intel 82571EB
Dual Gigabit
Ethernet
Controller
Intel 82571EB
Dual Gigabit
Ethernet
Controller
x4 PCI Express
XTAL EEPROM
EEPROM
x4 PCI
Express
AM
C
C
o
n
n
e
c
to
r
DC-DC
DC-DC
DC-DC
DC-DC
3.3V
1.8V
1.5V
1.0V
Power
Sequencers
3.3V
1.8V
1.5V
1.0V
Clock
Buffer
XTAL EEPROM
IPMI
Controller
PGOOD
HotPlug Switch
IPMB-L
EEPROM
Temp. Sensor
Temp. Sensor
I/O Register
SPI
12V
1.8V
1.5V
1.0V
Vo
lt
a
g
e
Mo
ni
to
r
L
ink
LE
Ds
Payload Reset
Blue /Fault LEDs
GA[2..0]
ENABLE
GA
PULL
UP
Mgmt_Pwr
Mgmt_Pwr