5
SBOSE KETTLE OPERATION
It is recommended to operate SBOSE kettle several times
following the below instruction and discard off the water before
first use. This will remove the material or dust remained in the
appliance which is caused by the manufacturing process.
1. Open the lid by turning the Lid up while pressing the Lid lock
and fill water into SBODE kettle. Then replace the lid otherwise
the SBOSE kettle could not be cut off power automatically after
water being boiled.
Caution: the filled water level must be between the Max and Min
level as indicated on the housing. Too less water will do
damage to the heat element and if the water is overfilled, boiling
water may be ejected.
2. Replace the SBOSE kettle on the Power Base and connect to
power supply. Position SBOSE kettle so that the spout of kettle
is facing away from you.
3. Press down the switch and the lamp will be illuminated. And
water begins to be heated up. Do not remove the lid while the
water is boiling.
4. Power will be cut off automatically and switch will switch off the
SBOSE kettle once water has been boiled. And the lamp will be
off.
5. The boiling process can be terminated at any time by lifting the
kettle off the Power Base.
CAUTION:
-
Never operate the appliance empty. In the event of this case
occurred, terminal will cut off power automatically. Unplug
the appliance and let it completely cool down before re-use.
-
The filter must be in place during operation otherwise water
spillage may occur.
