Navsight Solution
– Hardware Manual
NAVSIGHTHM.1.4
7.7.5. CA-NAVS-COM-2M
This open ended cable connects on any serial port or CAN bus plug of the
rugged processing unit. It has the following characteristics:
●
1 x ODU Mini-Snap F Series S31F1C-P08MFG0-5500 plug
●
1x open end
●
IP-68 rating
●
2m long
Pin on ODU plug
Signal on serial ports Signal on CAN port
Color
1
SYNC_OUT/NC
-
GREY
2
GND
-
BLACK
3
TX+
CAN H
WHITE
4
TX / TX-
GND
BLUE
5
RX / RX+
CAN L
YELLOW
6
RX-
-
ORANGE
7
SYNC_IN
-
RED
8
+12V out
-
GREEN
7.7.6. CA-NAVS-COM-DB-0.3M
This cable is a general purpose communication cable, that can be connected
on each serial port available in the rugged processing unit, as well as on the
CAN bus connector. General characteristics are the following
●
1 x ODU Mini-Snap F Series S31F1C-P08MFG0-5500 plug
●
1x Male DB-9 plug
●
IP-68 rating
●
30cm long
Cable wiring depends on the port on which user will connect the cable and is as follows
Pin on DB-9 plug
PORT A
PORT B/C/D/E
CAN
1
SYNC IN A
SYNC IN
-
2
PORT A RX
PORT # RX / RX+
CAN L
3
PORT A TX
PORT # TX / TX-
SGND
4
SYNC OUT A
NC
-
5
SGND
SGND
-
6
-
RX-
-
7
-
TX+
CAN H
8
-
-
-
9
-
-
-
Note: This cable is included in the rugged processing unit package (3x units). It can also be ordered
separately.
60/73
Figure 7.10 : DB-9 cable
adapter
Figure 7.9 : Open ended COM
cable
