Navsight Solution
– Hardware Manual
NAVSIGHTHM.1.4
5.13.2. Electrical specifications
Parameter
Min.
Typ.
Max.
Units
Conditions
Operating voltage
12
24
36
VDC
Power consumption
7
W
Navsight-E with Ekinox2-I
9
W
Navsight-E with Apogee-I
8
10
W
Navsight-T/S with Ekinox2-I
10
12
W
Navsight-T/S with Apogee-I
Allowable Input Voltage Ripple
400
mV p-p
Under voltage lock out
11.5
V
Turn on threshold
8,5
V
Turn off threshold
Galvanic Isolation
250
VDC
VIN+ to Mechanical Ground
VIN- to Mechanical Ground
5.14. Typical wiring recommendations
In this section, we briefly describe a few recommended wiring diagrams.
5.14.1. Power supply connection
Concerning power supply, we recommend shielded cable, with at least AWG 24 wires.
48/73
Figure 5.19: Power supply wiring connections
NAVSIGHT
Power Connector
Power Supply
Shield is the mechanical ground.
Connected to Navsight Enclosure
VCC
GND
SHIELD
+12 to 36V DC
