EKINOX Series
– Hardware Manual
EKINOXV3HM.1.2
7.4.7. CA-AEK-SPLIT-MAIN-0.5M
This cable provides a robust and
easy access to all interfaces
available on the EKINOX MAIN
connector using standard plugs.
The cable has following characteristics:
●
1 x Fischer Core Series S-104-A092-130 that connects on MAIN connector
●
1x DB-9 for PORT A in RS-232 mode, full duplex
●
1x RJ-45 plug for Ethernet connection
●
1x Female DB-9 plug for CAN bus output
●
1x Male SMA plug for Sync IN A (External GNSS PPS connection)
●
Total length: 50cm (25cm before / after cable splitter)
Connectors pin-outs are defined below:
Pin on DB-9
“PORT A”
Function
Pin on DB-9
“CAN”
Function
Pin on RJ45
ETH
Function
2
PORT A RX
2
CAN L
1
Tx+
3
PORT A TX
3
GND
2
Tx-
4
SYNC OUT A
7
CAN H
3
Rx+
5
GND
6
Rx-
Pin on SMA
“SYNC IN A”
Function
Central pin
SYNC IN A
Outer
GND
44/46
Figure 7.10: CA-AEK-SPLIT-MAIN-0.5M – Lengths not to scale
