A-2
Saia-Burgess Controls AG
27-621 ENG07 – Manual – Web Panel MB - PCD7.D450WTPx and PCD7.W470WTPx
Safety information
Annex A
A
A.2
Safety information
ATTENTION
These devices must only be installed by a professional electrician, otherwise there is the
risk of fire or the risk of an electric shock.
WARNING
Product is not intended to be used in safety critical applications, using it in safety critical
applications is unsafe.
WARNING - Safety
The unit is not suitable for the explosion-proof areas and the areas of use excluded in
EN 61010 Part 1.
WARNING - Safety
Check compliance with nominal voltage before commissioning the device (see type label).
Check that connection cables are free from damage and that, when wiring up the device,
they are not connected to voltage.
Do not use a damaged device!
NOTE
In order to avoid moisture in the device due to condensate build-up, acclimatise the device
at room temperature for about half an hour before connecting.
CLEANING
The device can be cleaned in dead state with a dry cloth or cloth soaked in soap solution.
Do not use caustic or solvent-containing substances for cleaning.
MAINTENANCE
These devices are maintenance-free. If damaged during transportation or storage, no
repairs should be undertaken by the user.
GUARANTEE
Opening the module invalidates the guarantee.
EAC Mark of Conformity for Machinery Exports to Russia, Kazakhstan or Belarus.
