SBC PCD3 Series Page 10 Manual Download

Page: 10 / 133

Saia-Burgess Controls AG

Hardware manual for PCD3 series │ Document 26-789 ENG19│ 2018-06-29

Connections to the internet │ EPLAN macros

Guidance

2-3

2.2

Connection of Saia PCD

controllers to the internet

When Saia PCD controllers are connected directly to the internet, they are

also a potential target for cyber attacks. Appropriate protective measures must

always be taken to ensure secure operation.

PCD controllers include simple, integrated protection features. However, se-

cure operation on the internet is only guaranteed using external routers with a

firewall and encrypted VPN connections.

For more information, please refer to our support site:

www.sbc-support.com/security

2.3 ePLAN

macros

ePLAN

macros are available for project planning and engineering.

The ePLAN

electric P8 macros are available on the support page

www.sbc-support.com

The macros and article data are also provided on the

ePLAN

data portal.

www.eplandataportal.de

Summary of Contents for PCD3 Series






































































































































Search results

Summary of Contents for PCD3 Series

Reviews:

Related manuals for PCD3 Series

Brands by name

Popular brands

SBC PCD3 Series, Manual

Search results

Summary of Contents for PCD3 Series

Reviews:

Related manuals for PCD3 Series

Brands by name

Popular brands