A-9
UTP = Unshielded Twisted Pair
1
R201208-V21
Single Channel Active Video Balun Receiver
Model: VAB100R
With Additional BNC Loop Out
The VAB100R video receiver is a one channel active device that allows reception of real-time monochrome (B/W) or color video via Unshielded Twisted Pair
(UTP) cable. The unit receives one channel of video from transmitters with screw type terminals available for connections and provides one pair of BNC video
output.
The unit is compatible with active transmitter (e.g. VAB100T) and passive transceivers (e.g. VPB400TRJ) with transmission distance up to 1200 m / 4000 ft
and 600 m / 2000 ft respectively. Each switch can be independently adjusted for the different transmission distances and image quality based upon the type
and quality of the cable being used.
Features:
•
Transmit a full motion color video signal up to 1200 m / 4000 ft and a
B/W video signal up to 2400 m / 8000 ft.
•
Supports all bandbase signals including PAL, NTSC, SECAM.
•
Signal Transmission via UTP cable.
•
Transmission Signal 1Vp-p Composite Video.
•
Built-in transient protection and ground lifting, which eliminates
damaging voltage spike problems.
•
Built-in Filter: 0~6MHz
•
Video receiving connectors with screw type terminals.
•
Two BNC Video Outputs
•
Red LED: Power on/off
•
Yellow
LED:
Signal
•
Power supplied 12V DC
Application Diagram:
A)
B)
Panel View:
Components are
Made In USA
for this product:
Name of Component
Manufacturer
DCDC Power
National Semiconductor
Video Signal Disposal
Intersil
R&D Designed in Taiwan
Assembled in China
Front
Rear
Switch Chart:
Each switch can be independently adjusted for the different
transmission distances and image quality based upon the type and quality of
the cable being used.
12V DC + - G
A)
B)
USER MANUAL
