Zone Bollard
13822
80775
15/03/2019
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could damage the finish.
Do not clean the units with a pressure washer.
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice.
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
Saxby Lighting Ltd. BH23 3PE
Care and Cleaning
Recycling Advice
Safety Information
The shade must be replaced immediately should the shade become cracked or damaged. This
Fitting / Replacing Bulbs
When changing a bulb, always switch off at the mains and allow the bulb to cool
before handling. Dispose of used bulbs carefully. Use a soft cloth to handle bulbs,
avoid directly touching the bulbs as this will shorten their life.
Do not exceed the wattage stated or use a different shape bulb from that
indicated on the fitting.
You have correctly identified the wires.
The connections are tight.
No loose strands have been left out of the connection block.
Check That
Max. 60W E27
Wiring
Having correctly identified the wiring from your existing light fitting, connect to the connection block inside the
product in the following way:
