www.saxbylighting.com
Instruction manual
78963, 78965, 78967, 78969
Surge PIR
78963 : 10W LED Module (SMD), 4000K
78969 : 50W LED Module (SMD), 4000K
78965 : 20W LED Module (SMD), 4000K
78967 : 30W LED Module (SMD), 4000K
V4 07/01/2022
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
UK Manufacturer: BH17 7BY
Technical data
PIR Specification
220-240 V~, 50 Hz
Supply
Voltage:
Bulb
Type:
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
Care and Safety
This light source is protected by a shade. This part must be replaced immediately should the shade
become cracked or damaged. This fitting must not be used without the shade in place.
Replace Cracked Shade
Conformity with all relevant UKCA Directive requirements.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is rated at IP44.
IP
44
This product is not suitable for dimming.
For further information, please visit
https://www.lighting-info.co.uk/78963
These products contain a light source of energy efficiency class
F
.
Non-replaceable control gear
Non-replaceable light source
This product is Class 1, must be connected to earth.
Conformity with all relevant EC Directive requirements.
78963, 78965, 78967 and 78969 are fitted with PIR motion sensor. The specification is as follows:
Power Source:
220-240VAC
Power Frequency:
50/60Hz
Rated Load:
MAX. 50W
Detection Range:
120º
Detection Distance:
8±2m (<24ºC)(adjustable)
Time Setting:
10±5sec-8±2min. (adjustable)
induction area figure:
4m±2m
8m±2m
120º
Ambient Light:
2-2000Lux. (adjustable)
Detection Motion Speed:
0.6-1.5m/s
Working TemperaturePower:
-10ºC--+45ºC
Working Humidity:
<40%RH
Installation Height:
1-3m
