• When changing a bulb, always switch off at the mains
and allow the bulb to cool before handling. Used bulbs
should not be disposed of with household waste. Please
recycle where facilities exist.
• Always use the correct type and wattage bulb. Using the
incorrect wattage bulb will damage the bulb and ballast.
Commissioning
Fitting/replacing bulbs
Instruction leaflet
Eyot Wall
EL-YG-5006, EL-YG-5007
www.saxbylighting.com
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
Saxby Lighting Ltd. BH23 3PE
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
Glass parts – Remove and wash in warm water or just use
a damp cloth. Do not use abrasive materials as these will
damage the finish.
This bulb is protected by a plastic shade. This part must be replaced immediately should the plastic
shade become cracked or damaged. This fitting must not be used without the plastic shade in place.
Replace Cracked
Shade
• Fit the bulb, refit the plastic shade, and secure using the
screws.
• Replace fuse or circuit breaker and switch on. Your light
is now ready for use.
Iss.2 30052014
10W G24d-1 2 PIN PLC
