- 12 -
The refrigerator shall be used in a dry area where there is no
chance of being exposed to water splash or other types of liquids or
direct sunlight or heat conducted from hot pipes, warm air outlets,
cookers, etc.
The refrigerator should be positioned and secured on a solid surface
in the vehicle.
Keep the refrigerator away from direct sunlight or a gas stove or
6. Operation
6.1 Connection to 220V-240V AC
Connect only to either of the following power sources:
• 220-240V AC from wall outlet (the mains)
• 12V or 24V DC battery.
AC and DC voltages may be connected simultaneously, when AC
will be automatically selected if both voltages are applied.
Before starting to use your new refrigerator, its interior as well
as exterior shall be thoroughly cleaned with a wet cloth to avoid
hygiene issue.
This refrigerator can be connected to a standard domestic power
source by using the three-core lead accompanying the refrigerator.
Insert the plug into the input terminal housing on the refrigerator.
Next, set the temperature setting knob to "0" (OFF). Then, set it
anywhere between 1 and 5. Turn the temperature setting knob to
a required setting.
6.2 Connection to 12V or 24V DC battery
Make sure the battery voltage matches with the voltage stated on
the refrigerator label. If the battery voltage is too high it will
damage the refrigerator.
NOTICE
heater or heat generating refrigerator.
Avoid installing your refrigerator close to hot water lines or warm air
ducts.
Adequate ventilation and suitable distance from each wall (at least
150 mm) will enable optimized cooling performance and minimized
power consumption.
