Figure 16
Figure 17
Figure 18
14. OPERATING
INSTRUCTIONS
Restore power to ceiling fan and test for
proper operation.
A.
HI
,
MED
, and
LOW
buttons:
These three buttons are used to set the
fan speed as follows:
HI
= high speed
Med
= medium speed
Low
= low speed
B.
OFF
button:
This button turns the fan off.
C. button:
This button controls the light. Press and
release the button to turn the light ON or
OFF. Press and hold the button to set the
desired brightness. The light key has an
auto-resume, it will stay at the same
brightness as the last time it was turned
off.
The Reverse switch is located on the top
of the motor housing. Slide the switch to
the Left for warm weather operation. Slide
the switch to the Right for cool weather
operation.
Speed settings for warm or cool weather
depend on factors such as the room size.
Ceiling height, number of fans and so on.
NOTE:
Wait for fan to stop before changing
the setting of the slide switch.
Warm weather - (Forward) A downward
airflow creates a cooling effect as shown in
Fig. 17. This allows you to set your air
conditioner on a warmer setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as
shown in Fig. 18. This allows you to set your
heating unit on a cooler setting without
affecting your comfort.
LOW
OFF
HI
MED
8
