Savin MLP28 Operating Instructions Manual Download Page 193

Page: 193 / 299

Monitoring and Configuring the Printer

193

❒

The password can be entered using up to 32 alphanumeric characters. Pass-
words are case-sensitive. For example, “R” is not the same as “r”.

prnlog

Use the “prnlog” command to obtain printer log information.

❖

Print logs display

msh> prnlog

• Displays 16 previous print jobs.

msh> prnlog ID Number

• Specify the ID number of the displayed print log information to display ad-

ditional details about a print job.

❒

For details about displayed contents, see

p.210 “Getting Printer Information

over the Network”

rendezvous

Use the “rendezvous” command to display rendezvous-related settings.

❖

View settings

Rendezvous settings are displayed.

msh> rendezvous

❖

Current computer name display

msh> rendezvous cname

❖

Display information about the current printer location

msh> rendezvous location

❖

Rendezvous computer name setting

You can specify the rendezvous computer name.

msh> rendezvous cname “computer name”

• The computer name can be entered using up to 63 alphanumeric charac-

ters.

❖

rendezvous Installation location information setting

You can enter information about the location where the printer is installed.

msh> rendezvous location “location”

• Information about location can be entered using up to 32 alphanumeric

characters.

Summary of Contents for MLP28












































































































































































































































































































Search results

Summary of Contents for MLP28

Reviews:

Related manuals for MLP28

Brands by name

Popular brands

Savin MLP28, Operating Instructions Manual

Search results

Summary of Contents for MLP28

Reviews:

Related manuals for MLP28

Brands by name

Popular brands