manualshive.com logo in svg

Savin Aficio SP 4100N, Operating Instructions Manual

Share
Download
Savin Aficio SP 4100N Operating Instructions Manual Download Page 55

Windows 2000 - USB

• Installing a printer driver requires Administrators permission. Log on using an account that has

Administrators permission.

If the printer driver has already been installed, plug and play is enabled, and the icon of the printer
connected to the "USB" port is added to the [Printers] window.
If the printer driver is not installed, follow the plug-and-play instructions of the printer to install it from the
CD-ROM provided.

1.

Check that the power of the printer is off.

2.

Connect the printer and computer using the USB cable.

Connect the USB cable firmly.

3.

Turn on the power of the printer.

Found New Hardware Wizard starts, and USB Printing Support is installed automatically.

4.

In the [Found New Hardware Wizard] display, click [Search for a suitable driver for my
device [recommended]], and then click [Next >].

5.

Select the [Specify location] check box, and then click [Next >].

6.

Insert the CD-ROM into the CD-ROM drive.

When Auto Run starts, click [Exit].

7.

Specify the location where the source files of the printer driver is stored.

If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:

• RPCS

D:\DRIVES\RPCS\WIN2K_XP\(Language)\DISK1

• PCL 5e

D:\DRIVES\PCL5E\WIN2K_XP\(Language)\DISK1

• PCL 6

D:\DRIVES\PCL6\WIN2K_XP\(Language)\DISK1

• PostScript 3

D:\DRIVES\PS3\WIN2K_XP\(Language)\DISK1

8.

Check the printer driver location, and then click [OK].

9.

Click [Next >].

10.

Click [Finish].

If the printer driver has already been installed, plug and play is enabled, and the icon of the printer
connected to the "USB001" port is added to the [Printers] window.

Installing the Printer Driver Using USB

53

1

Summary of Contents for Aficio SP 4100N

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands