manualshive.com logo in svg

Savin Aficio SP 4100N, Operating Instructions Manual

Share
Download
Savin Aficio SP 4100N Operating Instructions Manual Download Page 331

When Using Windows Terminal Service/

MetaFrame

The following explains how to use Windows Terminal Service and Maintenance.

Operating Environment

The following operating systems and MetaFrame versions are supported.

Windows NT Server 4.0 Terminal Server Edition with SP6 or higher

• MetaFrame 1.8 SP3/FR1+SP3/SP4
• MetaFrame XP 1.0 SP1/SP2/FR1

Windows 2000 Server/Advanced Server

• MetaFrame 1.8 SP3/FR1+SP3/SP4
• MetaFrame XP 1.0 SP1/SP2/SP3/SP4/FR1/FR2/FR3
• MetaFrame Presentation Server 3.0
• Citrix Presentation Server 4.0

Windows Server 2003/2003 R2

• MetaFrame XP 1.0 FR3
• MetaFrame Presentation Server 3.0
• Citrix Presentation Server 4.0

Supported Printer Drivers

When Windows Terminal Service is operating

• PCL printer drivers
• PostScript 3
• RPCS drivers

• Some RPCS printer driver functions do not work if Windows Terminal Service is installed.

Limitations

The following limitations apply to the Windows Terminal Service environment.
These limitations are built in Windows Terminal Service or MetaFrame.

When Using Windows Terminal Service/MetaFrame

329

10

Summary of Contents for Aficio SP 4100N

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands