manualshive.com logo in svg

Savin Aficio SP 4100N, Operating Instructions Manual

Share
Download
Savin Aficio SP 4100N Operating Instructions Manual Download Page 262

Printers listed by SmartDeviceMonitor for Admin

SmartDeviceMonitor for Admin lists printers connected to the network. If you cannot identify the printer
you want to configure, print configuration page, and then check the printer name.

Setting Up as a Print Server (NetWare 3.x)

Follow the procedure below to connect the printer as a print server using NetWare 3.x.

1.

Start Web Image Monitor.

2.

Click [Login].

A dialog box for entering the login user name and password appears.

3.

Enter the login user name and password, and then click [Login].

For details about the login user name and password, consult your administrator.

4.

In the left area, click [Configuration], and then click [NetWare] in "Network".

• Print Server Name: Enter the NetWare print server name. To use the interface board as a print

server, enter the name of a print server that is not active on the file server. Use up to 47 characters.

• Logon Mode: Specify whether to designate a file server or NDS tree when logging on to

NetWare.

• File Server Name: When a file server name is entered here, only the specified file server is

searched for. This item is mandatory. Use up to 47 characters.

• NDS Tree: To enable NDS mode, enter the name of the NDS tree you want to log on to. Use up

to 32 alphanumeric characters.

• NDS Context Name: To enable NDS mode, enter the print server context. Use up to 127

characters.

• Operation Mode: Specify whether to use the interface board as a print server or a remote printer.
• Remote Printer No.: This item is effective when the interface board is specified as a remote printer.

Enter the same number as the number of the printer to be created on the print server (0 to 254
characters).

• Job Timeout: When the interface board is used as a NetWare remote printer, the printer cannot

detect when a print job ends. Therefore, the printer terminates printing when a certain period of
time has elapsed since it last received print data (i.e., when it has not received print data for a
certain period of time). Specify here this period of time (3 to 255 seconds). The initial value is
15 (seconds).

• Frame Type: Select the frame type from the drop-down menu.
• Print Server Protocol: Select the protocol for NetWare from the drop-down menu.

5.

Confirm the settings, and then click [OK].

Configuration is now complete. Wait several before restarting Web Image Monitor.

7. Using a Printer Server

260

7

Summary of Contents for Aficio SP 4100N

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands