manualshive.com logo in svg

Savin 8025e, Operating Instructions Manual

Share
Download
Savin 8025e Operating Instructions Manual Download Page 89

Before Delivering Files

81

4

Installing DeskTopBinder Lite from the Supplied CD-ROM

This section explains how to install DeskTopBinder Lite on a client computer
from the supplied "Scanner Driver and Utilities" or "Scanner Driver/Font Man-
ager and Utilities" CD-ROM.
To view or receive files delivered to the in-trays, you must install DeskTopBind-
er Lite on the client computer.

A

Make sure Windows is running on the client computer, and then insert the
"Scanner Driver and Utilities" or "Scanner Driver/Font Manager and Utili-
ties" CD-ROM into the CD-ROM drive.

The installer is automatically started.

B

Click 

[

DeskTopBinder Lite

]

.

The 

[

DeskTopBinder Lite Setup

]

 dialog box appears.

For the subsequent installation steps, see the Setup Guide displayed from the

[

DeskTopBinder Lite Setup

]

 dialog box.

Note

❒

Before you start the installation, check the system requirements for Desk-
TopBinder Lite. For details, see "Software Supplied on CD-ROM".

❒

You can install the software using the auto-run program. For details about
the auto-run program, see "Auto-Run Program".

❒

If the installer does not start automatically, see “Auto-Run Program”.

Reference

p.140 “Software Supplied on CD-ROM”
p.140 “Auto-Run Program”

Summary of Contents for 8025e

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands