manualshive.com logo in svg

Savin 8025e, Operating Instructions Manual

Share
Download
Savin 8025e Operating Instructions Manual Download Page 19

11

1. Sending Scan Files by E-mail

You can attach scan files to e-mails and send them via connections such as LAN
and the Internet.

Before Sending Scan Files by E-mail

This section explains the necessary preparations and the procedure for sending
scan files by e-mail.

Outline of Sending Scan Files by E-mail

This section outlines the function for sending scan files by e-mail.

1.

This machine

A scan file can be attached to an e-mail and
sent to a mail server.

2.

SMTP server

You need to have an access to an e-mail
server that supports SMTP (Simple Mail
Transfer Protocol), to send scan files by e-
mail. However, it is not essential to have
an e-mail server inside the LAN where
this machine belongs. It transfers a re-
ceived e-mail to a specified destination
through a LAN or the Internet.

3.

Client computer

Use e-mail client software to receive e-
mail messages and scan file attachments
that are generated by this machine.

4.

LDAP Server

Use this server for administering e-mail
accounts, searching the network, and au-
thenticating the computers that access
the machine. Using the LDAP server, you
can search for destinations from the ma-
chine.

ZZZ508S

Summary of Contents for 8025e

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands