IMPORTANT
!
Initial Startup Requirements!
Before Powering on the SMS:
•
Verify that the SMS is connected to a network router or switch.
•
Verify that all audio outputs are connected.
Before Configuring the SMS:
•
Update the SMS-001A to the latest version of firmware.
Refer to the
Savant Media Server Single Source Deployment
Guide
located on the
Savant Community
for more information.
Box Contents
(1) Savant Media Server Single Source (SMS-001A-00)
(1) 12V DC Power Supply with Multi-country plugs
(1) RCA Y Adapter Cable - 3.5 mm (1/8 in) Stereo to Dual RCA
(1) Vesa Pattern Mounting Bracket (75 mm and 100 mm)
(1) Quick Reference Guide (this document)
Specifications
Environmental
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity
(non-condensing)
Cooling
10 CFM
Maximum BTU
65 BTU/hr
Dimensions and Weight
Dimensions and Weight
Height
2.0 in (51.5 mm)
Width
4.59 in (116.6 mm)
Depth
4.41 in (112 mm)
Weight (Net)
6 lbs (2.7 Kg)
Rack Space
2U (See RCK-5000)
Power
Power
Power Supply
12V DC
120-240V AC
36W
Storage
Storage
Internal
35 GB Solid State Drive
Audio
Audio
Stereo Audio Out
2 Channel
Compliance
Compliance
Safety and Emissions
FCC Part 15 | CE | C-Tick | CCC
RoHS
Compliant
Minimum Supported Release
Minimum Supported Release
Savant OS
da Vinci 6.0.1
Front Panel
USB 3.0
Single USB 3.0 port: Used to connect to
external USB hard disk drive for playback of
local content. (HDD not included)
Rear Panel
Power
Connector
12V DC 36W power connector.
Cooling
Vents
Provides cooling for the internal components.
WARNING!
DO NOT block vents in order to
maintain proper cooling.
Ethernet
8-pin RJ-45 10/100/1000 Base-T Gigabit auto-
negotiating Local Area Network (LAN) port
with Link/Activity LEDs.
Green
LED indicates link status
Yellow
LED indicates Ethernet activity
Data Rate
LED
O
ff
:
10 Mbps data rate
Yellow:
100 Mbps data rate
Link LED
O
ff
:
Ethernet link is not established.
Green Solid:
Ethernet link is established.
Green Blinking:
Ethernet activity is occurring
USB 2.0
Dual USB 2.0 ports: Used to connect to
external USB hard disk drive for playback of
local content. (HDD not included)
Audio Out
3.5 mm (1/8 in) Stereo jack for line level audio
output: Use included RCA Y adapter cable to
connect to Savant SmartAudio chassis or
amplifier.
Note:
Connections not identified in the diagram above are not functional
within a Savant Configuration/Installation.
SMS-001A-00 | 009-1195-03 | 150316
SMS-001A-00 | 009-1195-03 | 150316
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2015 Savant Systems, LLC
1 of 2
Savant® Media Server Single Source
Quick Reference Guide
For Product Info