Savant PRO REM-1000, User Manual

Page: 3 / 23

Savant Pro Remote User Guide 3 of 23 Copyright 2018 Savant Systems., LLC
009-1410-04 | 180228
2. Hardware Overview
Hardware information and button descriptions are described below.
REM-1000
Power Button Press/Release :
– Powers on the Remote. Remote will take 5-7
seconds before Savant logo appears.
– With Remote powered on, the power button
will toggle the last used A/V Service on or off.
Press/Hold (5 sec.) – Powers remote Off.
Microphone Used for voice commands and is positioned behind
small hole on top of remote.
IMPORTANT : Do not insert objects into the
microphone opening.
Touchscreen
Display
High resolution LCD display with multiple screens
for viewing and control of your Savant System.
– Motion Activated
– One touch and swipe operation
– Controls for Services
Volume Increase or decrease volume of the Service shown
on the touchscreen display.
Channel Channel up or down the service selected on the
touchscreen display (if applicable).
Navigation
(D-pad)
– Standard up, down, left, and right arrows used
for on-screen control.
– Press and hold the up/down arrows to page up
or down the on-screen menus.
– Press Select button to select the highlighted
item.
Voice Command Activate services, scenes, environmental controls,
and various other functions using voice commands.
See the Voice Commands section.
Remote Base Charging
Station
Charges the battery when the
Remote is set into the Remote
Base.
Service Control Generic Service buttons for basic control over
Audio/Video services. Function is dependent on
Active Service.
NOTE : Some buttons may do nothing for the active
service.
Wi-Fi Communicates with the Savant Pro
system over the local Wi-Fi
network.
Bluetooth Communicates with the Remote Base using
Bluetooth v4.0
Bluetooth Communicates with the Pro
Remote using Bluetooth v4.0
Infrared (IR) The Remote Base can be used to
transmit IR commands.