PAV-VOMVP1F/PAV-VOMVP1C | 009-1481-01 | 171201
Copyright 2017 Savant Systems, LLC
45 Perseverance Way, Hyannis, MA 02601
Savant.com
| 508.683.2500
1 of 2
Box Contents
(1) Audio/Video Over IP Receiver (PAV-VOMVP1F/PAV-V0MVP1C)
(1) SFP+ module (PAV-VOMVP1F only)
(1) Installation Kit (075-0199-xx)
(2) Mounting Brackets
(4) Screws
(1) IR Emitter (4ft long)
(1) Power Cord
(1) Power Adapter
(1) 4-pin Control Connector
(1) Quick Reference Guide (this document)
Required Components
Savant Audio/Video Over IP Device (PAV-VIM8S/PAV-VIM4S)
Savant System Host
Savant qualified 10G Managed Network Switch
Savant User Interface
Savant Design and Configuration Tools
Compliance
Safety and
Emissions
FCC Part 15
CE
C-Tick
RoHS
Compliant
1 = at 24 Hz
2 = at 25 Hz
3 = at 30 Hz
4 = at 50 Hz
5 = at 60 Hz
Video
HDR
Supported
Supported
Formats
640x480
5
720x480
5
720x576
4
800x600
5
1024x768
5
1280x720
4
1280x720
5
1280x1024
5
1920x1080
1
1920x1080
3
1920x1080
4
1920x1080
5
1920x1200
5
3840x2160
1
3840x2160
2
3840x2160
3
3840x2160
4
3840x2160
5
Audio
Supported
Formats
Pass-though of all HDMI audio formats are
supported.
Power
Input Power
12V 3A DC
Nominal Power
16 W (PAV-VOMVP1F)
19 W (PAV-VOMVP1C)
Maximum Power
36 W (PAV-VOMVP1F)
36 W (PAV-VOMVP1C)
Dimensions and Weights
Height
1.38 in (35.0 mm)
Width
8.27 in (210.0 mm)
Depth
5.47 in (139.0 mm)
Weight
Net: 3.3lb (1.5 kg) | Shipping 4.8lb (2.2 kg)
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
Specifications
Item
Description
RSVD LED
Reserved for future use.
Blue
- LED on by default.
Link TX LED
Off
- No valid connection
Blue
- Valid link
Blinking
- Sending Ethernet Data
Link RX LED
Off
-
No valid connection
Blue
- Valid link
Blinking
- Receiving Ethernet
Video LED
Off
- No video signal detected.
Blue
- Video signal detected.
Power LED
Off
- Device is off. No power applied.
Red
- Main board is powered
P1
Reserved for future use.
RSVD
Reserved for future use.
A
B
C
D
E
F
G
Front Panel
Network Configuration
To ensure that the IP Address will not change due to a power outage,
Savant recommends using DHCP reservation within the router. By
using this method IP Addresses for all devices can be managed from a
single UI, avoiding the need to access devices individually.
NOTE
: Setting DHCP reservation varies from router to router. Refer to
the documentation for the router to configure DHCP reservation.
Network Requirements
The A/V over IP Device requires a Savant qualified 10G managed
switch. This switch must be configured for the A/V over IP devices. For
more information on this see the
Savant Audio/Video over IP Network
Configuration Guide
on the
Savant Customer Community
.
A
B
C
D
E
F
G
For Product Info
Savant ProAV Single Port 4K UHD Video Output IP Receiver
with Video Processing and Control (PAV-VOMVP1F/PAV-VOMVP1C)
Quick Reference Guide
