Savant HRX-4KVLC100 Deployment Manual Download

Page: 22 / 27

Savant 4K HDR HDBaseT Matrix Switcher Deployment Guide

009-1893-01 | 200102

22 of 27

7.2. Web UI Firmware

Enter the IP address of the matrix into the address bar of a web browser and log in to the Web UI.

Example: http://10.0.100.50

2. Select the Firmware tab and scroll down to the Update Web UI section.
3. Click the Browse button.

BROWSE

UPDATE WEB UI

NOTE:

LAN Module will update and reboot automatically. Please wait about 3 minutes,

then refresh and login again. Do not power off the matrix when updating.

UPDATE

CLEAR

3
5

4. Browse to the SLN-xxVLC4K-WebUI-Vx.xx+x.bin Web UI firmware file, located in the unzipped firmware package folder downloaded in the

previous subsection.

5. Once the firmware file is chosen, select the Update button.
6. The switch will then complete the firmware update process and restart. The process will take approximately 3-5 minutes. When completed,

refresh the Web UI page and log back in.

7.3. MCU Firmware

Enter the IP address of the matrix into the address bar of a web browser and log in to the Web UI.

Example: http://10.0.100.50

2. Select the Firmware tab and scroll down to the Update MCU Firmware section.
3. Click the Browse button.

UPDATE MCU FIRMWARE

BROWSE

UPDATE

CLEAR

3
5

4. Browse to the SLN-xxVLC4K-Vx.x-McuUpdate.tar.gz MCU firmware file, located in the unzipped firmware package folder downloaded in the

previous subsection.

5. Once the firmware file is chosen, select the Update button.
6. The switch will then complete the firmware update process and restart.

Summary of Contents for HRX-4KVLC100




























Search results

Summary of Contents for HRX-4KVLC100

Reviews:

Related manuals for HRX-4KVLC100

Brands by name

Popular brands

Savant HRX-4KVLC100, Deployment Manual

Search results

Summary of Contents for HRX-4KVLC100

Reviews:

Related manuals for HRX-4KVLC100

Brands by name

Popular brands